Please don’t ask us to avoid paths, unless you actually hold an umbrella over said path every time it rains. Anything you don’t want to get wet (e.g.Large trees (particularly in lawn areas).Paths, driveways, retaining walls (or anything else that will prevent pipe and/or cable being laid).The more accurate the drawing, the more effective your irrigation system will be. We don’t work with Cubits or Camel-lengths. 1:100 (1cm = 100cm) is preferred, but 1:200 is fine for larger plans. The other thing that we need is a scale drawing of the site.
We can usually find the performance curves for most pumps. If you have a pump, or intend to use both mains and a pump, we’ll need to know the brand and model of the pump. This can be extremely useful for high-pressure pop-up sprinklers that need more pressure to pop out of the ground. You can use a valve and pressure gauge to get an even more accurate flow rate at a specific pressure. You’re done! Let us know the time and container size and we’ll calculate your available flow rate. Time how long it takes to fill the container.Coffee is optional, but highly recommended. Your flow rate will be more accurate if you test it before 6-7am. Irrigation systems are usually run early in the morning.Making sure to use the closest tap to where your solenoid valves will be located, turn the tap on full bore.
We offer a free design service for domestic, DIY installation. An irrigation system is far better than using a hosepipe or even a watering can but a good irrigation design is essential to ensure it’s done properly. Watering a garden manually can take a lot of time and effort, especially if it’s large and the weather is dry for prolonged periods. But keeping it that way takes a lot of work and that includes ensuring everything is well watered during the hot Australian summers. Many of us take great pride in having a garden that looks good with green lawns and healthy plants. Irrigation Design in Australia for that Perfect Garden
0 kommentar(er)
